A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Aerobic degradation by white‐rot fungi of trichloroethylene (TCE) and mixtures of TCE and perchloroethylene (PCE)

BACKGROUND: Trichloroethylene (TCE) and perchloroethylene (PCE) are considered among the most important groundwater pollutants around the world. These compounds are usually found together in polluted environments but little is known about the ability of microorganisms to simultaneously degrade TCE and PCE. RESULTS: Data showed that several species of white‐rot fungi, including Trametes versicolor, Ganoderma lucidum, and Irpex lacteus, degrade substantial levels of TCE in pure culture. T. versicolor was chosen for further study since it degraded higher levels of TCE than the other organisms. Initial glucose concentration and reoxygenation of samples increased the amount of TCE dechlorination, but no significant difference in percentage TCE degradation was observed. T. versicolor was able to degrade 34.1 and 47.7% of PCE and TCE added as mixtures (containing 5 and 10 mg L⁻¹, respectively). CONCLUSIONS: The degradation ability of TCE was extended to other species of white‐rot fungi. Percentage degradation as well as chloride release from mixtures of TCE and PCE showed that T. versicolor degrades mixtures of TCE and PCE almost as well as its ability to degrade individually added TCE or PCE. The results suggest the potential promise of T. versicolor for bioremediation of TCE and PCE in the environment. Copyright © 2008 Society of Chemical Industry     

Antimony Solubility and Speciation in Aqueous Sulphuric Acid Solutions at 298 K

This work is an experimental and theoretical study of antimony speciation and the solubility of Sb₂O₅, Sb₂O₃ and Sb₂(SO₄)₃ at 298 K in aqueous sulphuric acid solutions (0 to 6 kmol/m³). A thermodynamic model was developed to quantify the solubility products and aqueous metal speciation. Main dissolved species were H₃SbO_3(aq) and H₃SbO_4(aq). The solubility of antimony increases with increasing solution acidity and with the presence of hydrogen peroxide in the solution. The following standard equilibrium constants at 298 K were obtained: Log K⁰_(Sb2O5) = 11.7±0.5, Log K⁰_(Sb2O3) = 32±1, and Log K⁰_(Sb2(SO4)3) = 55±2.     

oDect: an RFID‐based object detection API to support applications development on mobile devices

The RFID technology is becoming ever more popular in the development of ubiquitous computing applications. A full exploitation of the RFID potential requires the study and implementation of human–computer interaction (HCI) modalities to be able to support wide usability by the target audience. This implies the need for programming methodologies specifically dedicated to support the easy and efficient prototyping of applications to have feedback from early tests with users. On the basis of our field‐working experience, we have designed oDect, a high‐level language and platform‐independent application programming interface (API), ad hoc designed to meet the needs of typical applications for mobile devices (smart phones and PDAs). oDect aims at allowing application developers to create their prototypes focusing on the needs of the final users, without having to care about the low‐level software that interacts with the RFID hardware. Further, in an end‐user developing (EUD) approach, oDect provides specific support for the application end‐user herself to cope with typical problems of RFID applications in detecting objects. We describe in detail the features of the API and discuss the findings of a test with four programmers, where we analyse and evaluate the use of the API in four sample applications. We also present results of an end‐user test, which investigated strengths and weaknesses of the territorial agenda (TA) concept. The TA is an RFID‐based citizen guide that aids—through time‐ and location‐based reminders—users in their daily activities in a city. The TA directly exploits EUD features of oDect, in particular concerning the possibility of linking detected objects with custom actions. Copyright © 2008 John Wiley & Sons, Ltd.     

多因素影响下红陶制品脆值的研究与应用

为了探究结构因素对红陶制品脆值的影响并精确化红陶制品脆值,提出一种通过离散红陶制品为陶片单元来估算其脆值的方法。以红陶片为研究对象,通过单因素试验和L27(313)正交交互试验探究质量、宽厚比和曲率及其交互作用对脆值的影响规律,利用Ansys仿真与试验得到不同陶片脆值。单因素试验结果表明,质量与脆值呈负相关,宽厚比与脆值呈正相关,随着曲率的增加,脆值先增大后减小,在24 m-1有最大值。由正交交互试验得出,各因素及其交互作用对脆值的影响次序由大到小依次为：质量、宽厚比、曲率、质量×曲率、质量×宽厚比、宽厚比×曲率。单个因素对陶片的影响更显著,故在精确陶制品脆值时,应优先考虑单个因素的影响。对8组试样的试验结果与仿真结果进行对比,得到二者最大误差为5.1%,证明了仿真的可靠性。     

倾斜耦合的光栅耦合器研究进展

近年来,片上光子集成技术备受关注并飞速发展,但在光纤与芯片、芯片与芯片上实现高效、高可靠性的光耦合仍是难题。光栅因其制作简单,位置灵活,对准容差大及可实现片上测试等一系列优点而备受研究者的关注。目前在绝缘体上硅(SOI)平台和绝缘体上铌酸锂(LNOI)平台上已开发出大量的光栅耦合器件,并获得较高的耦合效率和大带宽。该文主要介绍光栅耦合器的工作原理和主要性能指标,阐述了均匀光栅、倾斜光栅、闪耀光栅和切趾光栅耦合的特点及现阶段进展,并对具有代表性的一维光栅性能指标进行了比较。结果表明,分布式布喇格反射镜和金属反射镜可有效地提升光栅耦合效率。此外,该文还介绍了基于 LNOI平台的几种光栅耦合器, 其可帮助研究者们梳理光栅耦合器的发展历程、研究现状及各耦合器的特点,为未来研究提供一定的参考。     

Impacts of geographical knowledge, spatial ability and environmental cognition on image searches supported by GIS software

Google Earth search function was used to study the impacts of small-scale spatial ability, large-scale environmental cognition, and geographical knowledge on new technology usage. The participants were 153 junior high students from central Taiwan. Geography grades served as indicators of prior knowledge, mental rotation and abstract reasoning skills as indicators of spatial ability, and sketch maps of school neighborhoods as indicators of environmental cognition (including landmark representation, intersection representation, and frame of reference). Lastly, the authors announced the landmarks searching worksheet and asked the participants to accomplish 16 familiar and unfamiliar landmark searching tasks using Google Earth with keyword search function disabled. The result showed the strongest predictor of landmark searching performance is ‘frame of reference’ in environmental cognition, followed by ‘mental rotation’ of spatial ability, ‘landmark representation’ of environmental cognition, and geographical knowledge. Google Earth landmark searches require complex cognitive processing; therefore, our conclusion is that GIS-supported image search activities give students good practice of active knowledge construction.     

Interaction of Langmuir–Blodgett and spin-coated films of μ-carbido-bridged ironphthalocyanine with NO2: Optical and conductimetric behaviour

The present study investigates the interaction of NO₂ gas and μ-carbido-bridged iron phthalocyanine (PcFeCFePc) films obtained by Langmuir–Blodgett (LB) and spin-coating (SC) techniques. The phthalocyanine bridged dimer under study belongs to the polynuclear unsubstituted phthalocyanines class and presents poor solubility: in contrast the corresponding N-base bis-adducts are soluble enough in organic solvents to be deposited by Langmuir–Blodgett and spin-coating techniques. The reaction with NO₂ is monitored by visible spectra variation that shows identical behaviour for both kinds of films, indicating that the chemical reaction between the gas and the films is independent of the deposition method. The electrical conductivity change as a function of time with NO₂ is instead dissimilar: for spin-coated films it shows a behaviour already observed for sandwich-type phthalocyanine whereas for LB films it resembles that of monomeric phthalocyanine. Such a response implies that the charges (holes) generated in the oxidation/reduction process are carried differently through the material, and we attempt to explain this behaviour taking into account the two different structural and morphological features induced by the two techniques.     

Target coverage in camera networks for manufacturing workplaces

In this paper, we investigate the camera network placement problem for target coverage in manufacturing workplaces. The problem is formulated to find the minimum number of cameras of different types and their best configurations to maximise the coverage of the monitored workplace such that the given set of target points of interest are each k-covered with a predefined minimum spatial resolution. Since the problem is NP-complete, and even NP-hard to approximate, a novel method based on Simulated Annealing is presented to solve the optimisation problem. A new neighbourhood generation function is proposed to handle the discrete nature of the problem. The visual coverage is modelled using realistic and coherent assumptions of camera intrinsic and extrinsic parameters making it suitable for many real world camera based applications. Task-specific quality of coverage measure is proposed to assist selecting the best among the set of camera network placements with equal coverage. A 3D CAD of the monitored space is used to examine physical occlusions of target points. The results show the accuracy, efficiency and scalability of the presented solution method; which can be applied effectively in the design of practical camera networks.     

Improved Adaptive Controller Synthesis of Piecewise‐Affine Systems

This paper considers the adaptive control problem for piecewise affine systems (PWS), a novel synthesis framework is presented based on the piecewise quadratic Lyapunov function (PQLF) instead of the common quadratic Lyapunov function to achieve the less conservatism. First, by designing the projection‐type piecewise adaptive law, the problem of the adaptive control of PWS can be reduced to the control problem of augmented piecewise systems. Then, we construct the piecewise affine control law for augmented piecewise systems in such a way that the PQLF can be employed to establish the stability and performance. In particular, the Reciprocal Projection Lemma is employed to formulate the synthesis condition as linear matrix inequalities (LMIs), which enables the proposed PQLF approach to be numerically solvable. Finally, an engineering example is shown to illustrate the synthesis results.